Standard sizes of reinforced concrete rings
Posted: Tue Feb 18, 2025 5:24 am
Numerical designations indicate the size of the products, but it is best to refer to special tables, where everything is indicated in detail, to find the optimal element.
An example of decoding the marking of the product KS-7-9: a wall ring 900 millimetres high and with a wall thickness of 70 millimetres.
The volume of the well depends on the size of the rings skype data are mounted. There are many options, but there are certain GOST standards in accordance with which the elements are manufactured.
Standard sizes of reinforced concrete rings:
Diameter – shows the 1st digit of the marking (usually the internal one is indicated), varies in the range of 7-20 centimeters. The diameter should be the same for all elements of the well.
Height - standard is 90 centimeters, varies in the range of 10-100 centimeters, indicated in the marking itself (KS-10, for example, is a ring with a diameter of 1 meter, KS-20 - 2 meters, etc.). If the height differs from the standard, then it goes in the marking as the second digit: KS 7-3 (diameter 7 decimeters, height 29 centimeters).
Wall thickness can be from 70 to 120 millimeters.
Specific gravity – from 46 to 2900 kilograms (but weight can be indicated in kg per m3).
Additional elements
To perform calculations and design, it is necessary to take into account all the elements that are included in the design. Wells are not built only from rings; various additional elements are usually used for installation, allowing any system configuration to be implemented.
An example of decoding the marking of the product KS-7-9: a wall ring 900 millimetres high and with a wall thickness of 70 millimetres.
The volume of the well depends on the size of the rings skype data are mounted. There are many options, but there are certain GOST standards in accordance with which the elements are manufactured.
Standard sizes of reinforced concrete rings:
Diameter – shows the 1st digit of the marking (usually the internal one is indicated), varies in the range of 7-20 centimeters. The diameter should be the same for all elements of the well.
Height - standard is 90 centimeters, varies in the range of 10-100 centimeters, indicated in the marking itself (KS-10, for example, is a ring with a diameter of 1 meter, KS-20 - 2 meters, etc.). If the height differs from the standard, then it goes in the marking as the second digit: KS 7-3 (diameter 7 decimeters, height 29 centimeters).
Wall thickness can be from 70 to 120 millimeters.
Specific gravity – from 46 to 2900 kilograms (but weight can be indicated in kg per m3).
Additional elements
To perform calculations and design, it is necessary to take into account all the elements that are included in the design. Wells are not built only from rings; various additional elements are usually used for installation, allowing any system configuration to be implemented.