Drywall is perfect for leveling walls for wallpaper
Posted: Tue Feb 18, 2025 5:19 am
Before starting work, you should prepare the wall.
Plasterboard for leveling - if you want to do everything faster
One of the fastest, cleanest and most convenient ways to level walls for wallpaper, which does not require serious practical skills and significant time investment, is the use of plasterboard.
Today, there are two types of this procedure: frame rich people data frameless methods. Both are widely used during repairs, with the frame method being preferable in cases of significant wall curvature, large surface defects, and the impossibility of using other levelers.
This method is more time-consuming and expensive, but allows you not only to get a smooth surface, but also to "hide" wires, cables, pipes. To install plasterboard panels, you will first need to install a frame made of wooden beams or metal profiles.
The frameless (adhesive) method allows for laying plasterboard sheets directly on the walls if the defects are minor. Sometimes the adhesive method requires preparatory work. You cannot do without it if there are chips, cracks, unevenness, which can be eliminated by performing the following actions:
cleaning the surface from dirt and old plaster;
starting primer;
filling in any uneven areas;
finishing primer.
After preparation, glue is applied to the surface of the wall and plasterboard sheets, then the plate is applied to the wall. It must be held until the glue "sets". After the material is completely laid, it is tapped with a rubber hammer.
There are two ways to attach plasterboard: frame and seamless
Plasterboard for leveling - if you want to do everything faster
One of the fastest, cleanest and most convenient ways to level walls for wallpaper, which does not require serious practical skills and significant time investment, is the use of plasterboard.
Today, there are two types of this procedure: frame rich people data frameless methods. Both are widely used during repairs, with the frame method being preferable in cases of significant wall curvature, large surface defects, and the impossibility of using other levelers.
This method is more time-consuming and expensive, but allows you not only to get a smooth surface, but also to "hide" wires, cables, pipes. To install plasterboard panels, you will first need to install a frame made of wooden beams or metal profiles.
The frameless (adhesive) method allows for laying plasterboard sheets directly on the walls if the defects are minor. Sometimes the adhesive method requires preparatory work. You cannot do without it if there are chips, cracks, unevenness, which can be eliminated by performing the following actions:
cleaning the surface from dirt and old plaster;
starting primer;
filling in any uneven areas;
finishing primer.
After preparation, glue is applied to the surface of the wall and plasterboard sheets, then the plate is applied to the wall. It must be held until the glue "sets". After the material is completely laid, it is tapped with a rubber hammer.
There are two ways to attach plasterboard: frame and seamless