If you have available funds, installation can be entrusted to specialists.

[zihadhosenjm40]

The supports are screwed into the soil using a rod, and it is important to control the verticality of the element's entry into the soil. Deepening is carried out until the support reaches a level at which the soil does not freeze in winter.

After the elements are screwed into the ground, the upper ends of the supports must be leveled. A grinding machine is used for this, with its help it is easy to cut off excess pipes. After this, a concrete mixture must be poured inside the products, this will increase the strength characteristics of the pipes and significantly reduce the rate of metal corrosion.

At the final stage of installation, it is necessary to take metal plates. It is best to use products with a thickness of 10 mm. They are welded to each support so that they extend beyond the rack on each side, protruding a few centimeters. The foundation for a frame bathhouse on screw piles (with your own hands or by a contractor) is made in exactly the same way.
The supporting elements can be connected to each other using a special structure, it is called a grillage.

Most often it is made of concrete, but rolled metal and reinforced concrete can also be used. The structures are made prefabricated and monolithic.

In addition, a pile foundation for a bathhouse can be made from a ready-made set of support elements, which are available for sale in construction stores.


Bathhouse made of timber
The number of buildings of this type being erected has cameroon mobile database be done with your own hands, the speed of erecting a foundation for a bathhouse on screw piles is very high.

Important! All supports before immersion into the ground, if they were made of metal, must be treated with an anti-corrosion agent. This will significantly increase their service life. The process of screwing the pile into the soil will be simplified due to the presence of special blades on the sharp end of the pile. The products must be screwed into the soil.

When calculating the foundation for a bathhouse, it is necessary to take into account SP 24.13330.2011, in addition, the SNiP 2.02.03-85 edition can be used. If it is difficult to make calculations on your own, then you should contact a designer. Foundation elements should be purchased taking into account the specialist's recommendations.

How to make a drain?
When constructing a foundation for a bathhouse, it is important to make a drain. Since the bathhouse will be installed on screw piles, a regular drain with a water seal will not work - the water in it will freeze in winter.