Popular models of heating elements

[zihadhosenjm40]

Step three: Remove the top cover of the device.

Step four. The input terminals are checked with a phase meter to ensure that there is no voltage. This is not necessary, but just to be on the safe side.

Step five. Unscrew the nuts that secure the heating element itself, then fold back the supply cables.

Step six. It is absolutely necessary to check the condition of the contacts of the new heating element! These contacts must be completely dry.

Step seven. After this, the anode, which is intended for protection, is changed along with the heating element.

Step Eight: When installing the new heating element, use only high quality sealing rings, without any cuts or dents.

Step nine. The installation process itself is an exact copy of the dismantling, only it is done in reverse order.

Step ten. Finally, the water heater must be filled with water, and excess air must be released from the tap intended for hot water supply. Then all that remains is to connect the boiler to the spain mobile database network and check its functionality.

Video – Cleaning the heating elemen

Modern heating elements for water heaters are presented in a fairly wide range, and there are quite a lot of manufacturers. They all differ in design features, as well as in purpose and average market price. Today we will consider only the most popular manufacturers.

Heaters for Ariston products
An Italian company whose heating elements are made of a special alloy of copper and chromium-nickel. The heat output of the devices is increased by using a brass flange. The average power depends on the specific model and varies from 1 to 4.5 kilowatts.