Step-by-step instructions for grouting

[zihadhosenjm40]

To ensure that the seams are uniform, plastic crosses are inserted between the tiles. After the installation is complete, they can be removed in a day and grouting can begin. The grout mixture is applied to the tiled floor with a rubber spatula, lightly pressing it into the seams. Excess is wiped off the tiles with a damp, but not wet, cloth. After hardening in a couple of days, additional sealant is applied over the grout.


Recommendations and tips
To glue tiles to the floor with your own hands correctly and evenly, you should:

thoroughly clean the subfloor from any paints or varnishes (the tile adhesive will peel off from them sooner or later);
After gluing, check each tile strictly for horizontality using a level, and if necessary, press down from above or add glue from below;
regularly wet the notched trowel in water to prevent the glue saudi arabia mobile database sticking to it;
after laying tiles in the entire room, leave it closed for at least a day; walking on the newly glued tiled floor is prohibited;
the markings should be done so that there are whole tiles at the threshold and in visible places of the room, and cut elements can be placed under plumbing fixtures and furniture;
Remove excess glue from the tiles and seams before it dries.
Light grout fades over time, so it is better to take a dark one. To cut holes for pipes, first you need to drill holes in the tile with a small drill. And then you can break off the unnecessary piece with pliers and trim the cut with a file.

In order for the floor tiles to please with their appearance for many years, their installation should be done without haste and after careful planning. It will take about a week to prepare the base, stick the tiles, completely set the glue and grout the seams in a room of up to 25 m2. You cannot rush with further repairs and walk on the freshly laid floor. Otherwise, you just need to follow the advice described above.

Ceramic tile flooring is quite popular. This material is often used to decorate floors in bathrooms, toilets or other utility rooms (for example, boiler rooms). Laying floor tiles with your own hands is quite a labor-intensive process. It requires attention and accuracy. And how to do it, we will tell you in this article.