Methods of installation of spans
Posted: Sun Feb 09, 2025 5:23 am
A wooden structure is inferior in strength and service life to a metal one, so it is chosen much less often.
Before installation, the elements are protected from moisture with antiseptics.
Installation can be continuous or sectional.
Solid
The fence is covered with corrugated sheeting with an overlap. The structure visually appears to be a solid wall. The posts are mounted with a step of 1.5-2.5 meters. The distance should not be increased, since it will be necessary to take thicker logs.
The average height of the fence is 1.7-1.8 m. The philippines mobile database can be attached horizontally or vertically.
The material consumption is calculated as follows: the total length of the fence is divided by the working width of the sheet.
With this type of fastening, the consumption of sheets is much greater than with sectional fastening.
Sectional
This installation method clearly highlights the spans.
Article: "Types of forged fences".
The pillars are made from:
bricks;
stone;
metal with forged elements;
Before installation, the elements are protected from moisture with antiseptics.
Installation can be continuous or sectional.
Solid
The fence is covered with corrugated sheeting with an overlap. The structure visually appears to be a solid wall. The posts are mounted with a step of 1.5-2.5 meters. The distance should not be increased, since it will be necessary to take thicker logs.
The average height of the fence is 1.7-1.8 m. The philippines mobile database can be attached horizontally or vertically.
The material consumption is calculated as follows: the total length of the fence is divided by the working width of the sheet.
With this type of fastening, the consumption of sheets is much greater than with sectional fastening.
Sectional
This installation method clearly highlights the spans.
Article: "Types of forged fences".
The pillars are made from:
bricks;
stone;
metal with forged elements;