Read about how to make natural ventilation with your own hands.

Latest collection of data for analysis and insights.
Post Reply
zihadhosenjm40
Posts: 524
Joined: Sat Dec 21, 2024 3:31 am

Read about how to make natural ventilation with your own hands.

Post by zihadhosenjm40 »

There are 3 options for constructing natural ventilation in a garage (diagrams):

The supply openings are located inside the wall below, and the exhaust openings are on the opposite side above (how to arrange supply ventilation with your own hands?). The circulation of air masses is carried out due to the lower air supply. A gradual displacement of air layers occurs: the air warms up and rises guatemala mobile database upward. It comes out through the built-in hood.
The placement of the hood is similar to the first scheme. The inflow is carried out through the upper openings on both sides of the garage door. The air exchange is as follows: fresh air enters from above. Warming up, it smoothly descends into the lower layers of the atmosphere. When the air cools down slightly, it rises again and exits through the openings (what are the features of installing ventilation outlets with your own hands?).
The ventilation pipe is placed in the lowest corner of the wall (it should be the shortest). A new air flow is passed through it into the garage. The exhaust is organized on the ceiling. Due to the temperature difference, the air is replaced, and the heated air leaves through the ventilation duct.
Forced
The mechanical ventilation system in the garage can be organized according to the following schemes:

The fan is placed at the bottom of the wall, it closes the inlet duct. An exhaust fan is mounted on the ceiling or wall. It should be placed on the opposite side, which is shorter. The old air is processed outside by the exhaust mechanism.
The first scheme is supplemented by the installation of air ducts. Different fans can be installed. If axial fans are used, they are placed at the entrance, if duct fans, then inside the air ducts. The exhaust duct itself is located along the perimeter of the room. It is equipped with grilles. In this case, a uniform distance must be maintained.
Read more about how to calculate everything and install forced ventilation.
Post Reply