Mansard roof with your own hands: video, photo
Posted: Thu Feb 06, 2025 5:31 am
It will be difficult to make an attic on your own, especially if you do not have the relevant experience, because it is a rather massive and complex structure.
The attic space can be installed under different types of roofs, but the most popular is the broken or gable design. According to the structure scheme, they differ slightly from each other.
In order to determine which of the costa rica mobile database will be more suitable for your home and will be easier to install, it is necessary to consider both options in more detail. In addition, the master who will be engaged in the construction of the attic roof must understand which of the two types of rafter system designs to choose.
Any roof belongs to one of the two existing types of rafter systems, which are layered and hanging structures. Each of them has its own peculiarity, and which one to choose depends on how the load-bearing walls of the structure are located.
Hanging structure
A hanging structure is a rafter system that rests only on the outer load-bearing walls. This occurs when there are no load-bearing partitions in the house itself, except for the outer walls.
This design can only be used if the distance between two load-bearing walls is no more than 8 m, since this system places a high load on the foundation. To reduce it, the hanging system uses different elements, such as ties and headstocks, braces and crossbars. For example, the headstock hangs the tie to the ridge joint, and the braces pull the beams to the rafters.
The attic space can be installed under different types of roofs, but the most popular is the broken or gable design. According to the structure scheme, they differ slightly from each other.
In order to determine which of the costa rica mobile database will be more suitable for your home and will be easier to install, it is necessary to consider both options in more detail. In addition, the master who will be engaged in the construction of the attic roof must understand which of the two types of rafter system designs to choose.
Any roof belongs to one of the two existing types of rafter systems, which are layered and hanging structures. Each of them has its own peculiarity, and which one to choose depends on how the load-bearing walls of the structure are located.
Hanging structure
A hanging structure is a rafter system that rests only on the outer load-bearing walls. This occurs when there are no load-bearing partitions in the house itself, except for the outer walls.
This design can only be used if the distance between two load-bearing walls is no more than 8 m, since this system places a high load on the foundation. To reduce it, the hanging system uses different elements, such as ties and headstocks, braces and crossbars. For example, the headstock hangs the tie to the ridge joint, and the braces pull the beams to the rafters.