If you did everything correctly,
Posted: Thu Feb 06, 2025 3:54 am
Step 1. In any of the graphic programs, process the image you like or create it from scratch if you have the appropriate skills. Print the prepared picture or inscription and cut off the excess part of the sheet for convenience in further work.
Step 2: On a work surface that you don't mind ruining, tape down a sheet of vinyl with masking tape. If you don't have a suitable table, use a sturdy board. Since this graffiti lettering is two-colored, two colors of vinyl will be used. The first piece to be attached is the gold piece of the original material, which is shown as the colored part in the picture.
Step 3. Using the same masking tape, attach bahamas mobile database cut-out inscription to the top of the vinyl sheet.
Step 4: Take a sharp craft knife and, pressing down, cut out the inner colored part of the inscription.
Step 5: Remove the paper. Cut out a piece of vinyl with the design already transferred onto it.
Step 6. Carefully remove the vinyl parts around the lettering with tweezers. Don't touch the lettering itself yet.
Step 7. Do the same with a sheet of black vinyl. Apply the printout with the middle already cut out to it. Use a knife to trace its inner contours, and then trace the outer edge of the drawing.
Step 8. you will get the inscription itself and the shadow that gives it volume.
Step 9. To glue the two parts of the inscription neatly and precisely, use adhesive tape. Stick it directly on top of the prepared image.
Step 10: Wipe the surface where you will be sticking the vinyl sticker with alcohol and cotton wool.
Step 11. First, glue the inner, colored part of the lettering and remove the strip of tape, then attach the shadow cut out of black vinyl to the surface. Remove the tape as well.
Step 2: On a work surface that you don't mind ruining, tape down a sheet of vinyl with masking tape. If you don't have a suitable table, use a sturdy board. Since this graffiti lettering is two-colored, two colors of vinyl will be used. The first piece to be attached is the gold piece of the original material, which is shown as the colored part in the picture.
Step 3. Using the same masking tape, attach bahamas mobile database cut-out inscription to the top of the vinyl sheet.
Step 4: Take a sharp craft knife and, pressing down, cut out the inner colored part of the inscription.
Step 5: Remove the paper. Cut out a piece of vinyl with the design already transferred onto it.
Step 6. Carefully remove the vinyl parts around the lettering with tweezers. Don't touch the lettering itself yet.
Step 7. Do the same with a sheet of black vinyl. Apply the printout with the middle already cut out to it. Use a knife to trace its inner contours, and then trace the outer edge of the drawing.
Step 8. you will get the inscription itself and the shadow that gives it volume.
Step 9. To glue the two parts of the inscription neatly and precisely, use adhesive tape. Stick it directly on top of the prepared image.
Step 10: Wipe the surface where you will be sticking the vinyl sticker with alcohol and cotton wool.
Step 11. First, glue the inner, colored part of the lettering and remove the strip of tape, then attach the shadow cut out of black vinyl to the surface. Remove the tape as well.