The resulting parts will be heated over a fire, cooled, and the device can be assembled.

[zihadhosenjm40]

Bleed out any butane or propane that may remain inside.
It is advisable to carefully open the valve. If it is stuck, try to knock it out with a sledgehammer or cut it with a grinder.
Fill the flask to the top with water for 12-24 hours. During this time, the liquid will dissolve the hydrocarbons. It is better to repeat the procedure several times.
Water should be poured onto areas of soil without vegetation. When working with a grinder, you need to put on protective glasses, a mask, and a suit so that in the event of a rebound, you do facebook data injure your hand or other part of the body.

It is recommended that all stages of work be carried out outdoors, away from children and residential buildings, since the smell of gas from the cylinder will linger for more than one day.


We make parts for the structure
It is necessary to prepare all important elements of the design in advance:

Legs. Their length will depend on the height of the grill itself. Pieces of steel pipes are suitable as material. They are attached to the bottom with bolts with external threads or welded. You can make them like a portable stand, using parts of an old sewing machine. For a stationary grill-smokehouse-barbecue, the legs are laid out of bricks, car wheel rims welded together, decorated with forging.
Photo: Making a stand

Cover. To install it, you need to drill holes for the hinges. They are fastened with rivets and welded. A removable cover will be obtained if the hinge axes are directed in one direction.
Handles. Attached to the lid with bolts. When choosing a model, pay attention first of all not to the beautiful design, but to the high heat resistance of the metal, so that your barbecue will last longer.
Chimney. It is made from a steel pipe 1.5–2 m long. It is cut into the upper part of the structure or into the opening from the vent. It is necessary for smoking products. It is not used when the barbecue lid is open.
The structure can be supplemented with a welded rain canopy.