Silk screen printing can be printed

[aminaas1576]

04 Glossy PP lamination
1. After printing, a transparent plastic film is applied to the surface of the printed material by heat pressing to protect and increase the gloss. The surface becomes bright, as shown in the figure below.
2. The most basic process for the surface treatment of paper boxes. Similar to varnishing, lamination can improve the hardness and strength of paper.

05 Matte PP lamination
1. After printing, a transparent plastic film is applied to the surface of the printed material by heat pressing to protect and increase the gloss. The surface becomes matte, as shown in the figure below.
2. The most basic process for paper box surface treatment. Similar to varnishing, lamination can improve the hardness and strength of paper.



06 UV varnishing
1. Local varnishing and glossing of parts of the ecuador number data printed material that need to be highlighted makes the local pattern more three-dimensional.
2. Printing with the matte lamination process, without the effect of using glossy lamination.

07 Foil stamping
1. Foil stamping uses the principle of heat transfer to transfer the aluminum layer in the electrolytic aluminum to the surface of the substrate to create a special metallic luster.
2. Printing materials are gold, silver, red, green, blue and other colors, but foil stamping can only be single color. There are many colors, but not all colors are available in the market.

08 Embossing/Deep embossing
1. Use a set of templates with corresponding amber and amber images, place the backing between them and press out the embossed raised images by applying more pressure.
2. Different thicknesses of paper can be used, but cardboard cannot be embossed.