It is advisable to study the instructions for the adhesive/foam well, because they all have different drying times at different temperatures. You may not have time to insert the tab correctly before it hardens.
Then the insert is carefully inserted into the bathtub. Pressed tightly along the sides and along the bottom. To fix it, the drain and overflow grates are immediately secured in place. Clamps can be installed along the sides for a tight fit. Additionally, silicone sealing rings can be used when installing the grates.
When everything is glued, you can start to make the edges of the bathtub beautiful. To hide the exposed part of the wall, a ceramic border is glued along the entire perimeter. Then a sealant is applied to the joints to protect against moisture.
During all these works, the protective film is not morocco mobile database from the insert. In order for the adhesive to dry, you need to fill the bathtub with clean water, not reaching a few centimeters from the overflow hole. Leave it like this overnight.
You can't take too much water. If it gets into the overflow hole before the sealant dries, it will lead to the whole job having to be redone.
Drain the water in the morning and everything will dry completely and stick.
Secrets to the Longevity of Acrylic Inlays
It is the quality of the insert itself that ensures 70% of the service life, and 20% of the correct installation. The remaining 10% are the conditions of care and use of the product. Thus, the last step towards the longevity of the installed liner is correct operation and care.
When a good liner was purchased, but it was installed by a clumsy craftsman, water begins to accumulate under the coating. Over time, it stagnates - mold appears and a disgusting smell appears in the bathroom. But this situation can be dealt with as a result of competent repair work, and the insert itself will serve for a long time.