take a piece of soft cloth and smooth out

[zihadhosenjm40]

A small sticker can be glued immediately. To do this, remove the paper protection, place the sticker on the surface with the adhesive side, and press with your fingers. Using a soft cloth or spatula, smooth it from the center to the edges. It is necessary to ensure that the sticker does not move during the smoothing process.

It is more difficult to glue large drawings. It is better to do this with the help of mounting film. The gluing order is as follows:

Transfer the sticker to the mounting film, placing it on a perfectly flat surface, such as a table. The adhesive side of the mounting film should be adjacent to the sticker design;
When all the folds are smoothed out, carefully remove the protective paper from the sticker, while the transparent mounting film should remain on the front side of the sticker;
carefully apply the product to the markings, carefully smoothing out the folds;
Press the sticker to the surface with a cloth or spatula so that it sticks to it as firmly as possible. This must be done very carefully so as not to damage the paint on the drawing. If air bubbles still form under the film, you can pierce them with a thin needle and smooth them with a spatula;
Now you can remove the mounting film and israel mobile database the sticker to the surface.
Stages of gluing vinyl stickers

It is better to apply children's products together with the child. Such work will bring the baby a lot of pleasure, and after that the child is unlikely to have a desire to spoil his work by picking at the sticker with his fingers.

Care instructions
Caring for stickers involves periodically washing their surface with a damp cloth. If the edge of the sticker accidentally peels off, simply smooth it with your hand or a dry cloth. Abrasive substances cannot be used to clean it. Thanks to modern vinyl-based stickers, you can quickly and easily add variety to your interior without spending a lot of money and effort.